Barracuda 7,200.12 Firmware Update

 

Firmware update information for Barracuda 7200.12 Serial ATA drives. Check to see if your model is included.

New firmware version: CC49


You can verify the proper firmware revision for your drive model and serial number using the Drive Detect software.

This update applies to the following models:

Model Number Capacity Firmware Downloads
ST31000528AS 1 TB CC49 in .exe format
   See Document ID: 004559 for instructions on updating your firmware in Windows using this .exe file.

CC49 in .iso format
   See Document ID: 004989 for instructions on updating your firmware in Windows using this .iso file.
   See Document ID: 004301 for instructions on updating your firmware in MacOS using this .iso file.
ST3750528AS 750 GB
ST3500418AS 500 GB
ST3500410AS 500 GB
ST3320418AS 320 GB
ST3250318AS 250 GB
ST3160318AS 160 GB

 If the firmware upgrade installation instructions are not followed properly, the firmware upgrade could be data destructive and/or render your hard drive inoperable. As Seagate does not warrant the data on your drive, in addition to regular back-ups, your data should be backed up, if possible, before upgrading the drive firmware. Though this firmware upgrade to your product is a change to the product, the terms and conditions of your Seagate warranty for the product will remain effective to its normal expiration. For other warranties on your product, please consult the warranty documentation provided by your supplier.