Lyve Cloud S3 Storage Resources Guide
Lyve Cloud S3 Storage Resources 

Cet article vous a-t-il été utile ?

OUVRIR LE MENU FERMER LE MENU

Lyve Cloud with BorgBackup

This guide will teach you how to deploy and perform data backups on Lyve Cloud with BorgBackup.

Prerequisites

The following prerequisites are required before installing BorgBackup.

  • A Lyve Cloud storage account
  • Permission with all operations
  • Install BorgBackup using YUM install for RHEL/CentOS
  • Install restic on CentOS

Configuration overview

The configuration for Lyve Cloud with BorgBackup is divided into three simple tasks.

  1. Create a Lyve Cloud Service Account. For more information, see Provisioning Storage Buckets.
  2. Installing and initializing BogBackup to Lyve Cloud.
  3. Executing backups to Lyve Cloud using Restic.

Installing BorgBackup and Restic

 Note—The following instructions are tested using BorgBackup version 1.1.18 and CentOS Linux release 7.9.2009 (Core), and Restic 0.13.1 compiled with go1.18 on Linux/amd64.

To install Borgbackup and Restic:

  1. Install BorgBackup using YUM install for RHEL/CentOS on CentOS.
  1. Open a shell prompt.
  2. Run the command to install epel repository.

    yum install epel-release
    

  3. Run the following command to install BorgBackup.

    yum install borgbackup
    
  1. Install Restic on CentOS.
  1. Run the command to install the yum-plugin-copr rpm package.

    yum install yum-plugin-copr
    

  2. Install restic via copr repository.

    yum copr enable copart/restic
    yum install restic
    

Initializing BorgBackup

To initialize BorgBackup:

  1. Run the borg init command with your repository file path to initialize the file space. In this example, the file path is /home/admin/borg-repo.

    borg init --encryption=repokey /home/admin/borg-repo
    

  2. Create a new passphrase to access your repository.
 Note—To access the repository, you need to enter the passphrase.
  1. Enter your new passphrase.

    Enter new passphrase:
    

  2. Re-enter your passphrase to confirm.

    Enter same passphrase again:
    

  3. Type Y to display your passphrase

    Do you want your passphrase to be displayed for verification? [yN] : y
    

  4. The following is the output, where your passphrase is displayed.

<result>Your passphrase (between double quotes) : For example123.

Make sure the passphrase displayed above is exactly what you wanted.

By default, repositories initialized with this version produces security errors if written with an older version (up to and including Borg 1.0.8). If you want to use these older versions, you can disable the check by running:

borg upgrade --disable-tam /home/admin/borg-repo

 

See https://borgbackup.readthedocs.io/en/stable/changes.html#pre-1-0-9-mmanifest-spoofing-vulnerability for details about the security implications.

 Important—You will need both KEY AND PASSPHRASE to access the repo. If you used a repo key mode, the key is stored in the repo, but you should back it up separately.

Optionally, use “borg key export” to export the key in printable format. Write down the passphrase. Store both at a safe place(s).

Executing backups

Use the following procedure for new and incremental backups.

  1. Run the create command to create a backup in the Borg repository.

The following example creates a backup to the borg repository called Thursday of files borg-scr and borg-src-2.

borg create –stats /path/to/source-folder::new-borg-repo-name path/to/borg-repo-destination
borg create --stats /home/admin/borg-repo::Thursday /home/admin/borg-src /home/admin/borg-src-2 
  1. Enter your passphrase to view your repository’s archival history with data including Archive fingerprint, start time, end time, and more.
Enter passphrase for key /home/admin/borg-repo:
------------------------------------------------------------------------
Archive name: Thursday

Time (start) : Thu, 2022-06-02 06:20:40Time (start): Thu, 2022-06-02 06:20:40

Time (end) : Thu, 2022-06-02 06:20:40

Duration: 0.02 seconds

Number of files: 2

Utilization of max. archive size: 0% 

------------------------------------------------------------------------

               Original size     Compressed size     Deduplicated size  

This archive:     1.42 kB          1.07kB              1.07kB

All archives:     1.42 kB          1.07kB              1.07 kB 

               Unique chunks    Total chunks 

Chunk index:         4               4      

Listing archives in the repository

To list archives in the repository:

  1. Use the command borg list followed by your repository file path.
borg list /home/admin/borg-repo
  1. Enter your passphrase to access your repository. 

In this example, we see a list of a single archive titled Thursday with the archive date and fingerprint.

Enter passphrase for key /home/admin/borg-repo:
Thursday Thu, 2022-06-02 06:20:40 [Archive fingerprint]
  1. To list the contents of an archive, use the command borg list followed by your repository file path and :Your_archive_name.

This example lists the contents of the Thursday archive.

borg list /home/admin/borg-repo::Thursday
  1. Enter your passphrase to access the repository.
Enter passphrase for key /home/admin/borg-repo:

drwxr-xr-x root   root         0 Thu, 2022-06-02 06:08:05 home/admin/borg-src 

-rw-r—r--  root   root         24 Thu, 2022-06-02 06:08:05 home/admin/borg-src/file1.txt 

drwxr-xr-x root   root         0  Thu, 2022-06-02 06:08:58 home/admin/borg-src-2

-rw-r—r--  root   root        25  Thu, 2022-06-02 06:08:58 home/admin/borg-scr-2/file2.txt 

Initializing Restic

The following instructions are intended for Restic and BorgBackup only. These commands have not been tested on similar tools.

  1. Open Terminal and enter your Lyve Cloud Access Key and Secret Key ID. For more information, see Creating service accounts.
export AWS_ACCESS_KEY_ID=<access key>export AWS_ACCESS_KEY_ID=<access key>
export AWS_SECRET_ACCESS_KEY=<Secret key>
  1. Initializing the Restic repository.
  1. Enter your Lyve Cloud bucket endpoint URL and create a password for your Restic repository.

    restic -r s3:https://s3.us-west-1.lyvecloud.seagate.com/borg-restic-bkt init
    

  2. Create a new password to access your repository.

    enter password for new repository:
    
  3. Re-enter the password to access your repository.

    enter the password again:enter password again:
    

    Once the password is successfully created, the repository is created.

    created restic repository fc56337ecc at s3:https://s3.us-west-1.lyvecloud.seagate.com/borg-restic-bkt
    

    Please note that knowledge of your password is required to access the repository. Losing your password means that your data is irrecoverably lost.
    

Using Restic with BorgBackup

To use Restic with Borgbackup:

  1. To perform your backup with Restic, enter your bucket endpoint URL followed by the verbose backup command and repository file path, as shown in the example below:
restic -r s3:https://s3.us-west-1.lyvecloud.seagate.com/borg-restic-bkt --verbose backup /home/admin/borg-repo
  1. Open and enter your password to access the restic repository.
open repository 
enter password for repository:

The output is shown as follows:

Files: 10 new, 0 changed, 0 unmodified
Dirs: 5 new, 0 changes, 0 unmodified
Data Blobs: 8 new
Tree Blobs: 6 new
Added to the repo: 49.873 KiB
processed 10 files, 43.127 KiB in 0:02
snapshot ddf98cf6 saved

Listing snapshots

To list snapshots:

  1. To list all snapshots, enter your bucket endpoint URL followed by the snapshots command.

    restic -r s3:https://s3.us-west-1.lyvecloud.seagate.com/borg-restic-bkt snapshots
    

  2. Enter your password.

    enter password for repository:
    

  3. The output will display as shown:

ID     Time             Host                                Tags   Paths            
--------------------------------------------------------------------------------------------------------------------------------
ddf98cf6 2022-06-02 08:35:41    admin-centos.symphony.local                      /home/admin/borg-repo     
   ----------------------------------------------------------------------------------------- --------------------------------
1 snapshots

Restoring backups

To restore a backup:

  1. Enter your bucket endpoint URL, restore (snapshot ID), and set the target location for your local machine.

    The following example shows as seen in the example below:

    restic -r s3:https://s3.us-west-1.lyvecloud.seagate.com/borg-restic-bkt restore ddf98cf6 --target ./borg-restic-restore 
    

  2. Enter your password.

    enter password for repository:
    

    The output will display as shown below:

    repository fc56337e opened successfully, password is correctrestoring <Snapshot ddf98cf6 of [/home/admin/borg-repo] at 2022-06-02 08:35:41.456400179 +0000 UTC by root@admin-centos.symphony.local >to ./borg-restic-restore 

  3. Run the list command followed by the restore file path to list the contents of the archive downloaded from Lyve Cloud.

    borg list /home/admin/borg-restic-restore/home/admin/borg-repo/
    

    The output will display as shown below:

    Thursday Thu, 2022-06-02 06:20:40 [Archive fingerprint]

  4. Run the extract command followed by the borg repository file path and archival name to restore the borg repository downloaded from the cloud.

    borg extract /home/admin/borg-restic-restore/home/admin/borg-repo/::Thursday
    

  5. Enter your password for the borg repository.

    Enter passphrase for key /home/admin/borg-restic-restore/home/admin/borg-repo:
    

    The image displays as:

[ INSERT borgbackup-restore-01.png ]

Deleting archives

The snapshot in the example above is removed, but the data that was referenced by files in this snapshot is still stored in the repository. To clean up unreferenced data, the prune command must be used.

To delete archives:

  1. Run the delete command followed by the borg file path and archive name to recover disk space by manually deleting the archive on the local machine.

    borg delete /home/admin/borg-restic-restore/home/admin/borg-repo/::Thursday

  2. Enter your passphrase to confirm the deletion.

    Enter passphrase for key /home/admin/borg-restic-restore/home/admin/borg-repo: XXX 

  3. To delete a snapshot from the restic repository in the cloud, use the following command and specify the snapshot ID to be removed.

    restic -r s3.endpoint.URL/target-bucket forget snapshot ID 
    

    In this example, we are deleting snapshot f8a6becd from the restic-new-bkt in Lyve Cloud.

    restic -r s3:https://s3.us-west-1.lyvecloud.seagate.com/restic-new-bkt forget f8a6becd
    

  4. Enter the password for the repository.

    In the output below, snapshot ID,  f8a6becd, has been deleted from the 99eb2711 repository.

    enter password for repository: 

    Repository 99eb2711 opened successfully, password is correct 

    (0:00) 100.00% 1/1 files deleted... 

  5. Clean up unreferenced data.

    The snapshot in the example above is removed, but the data that was referenced by files in this snapshot is still stored in the repository. To clean up unreferenced data, the prune command must be used.

    restic -r s3.endpoint/restic-repo-bkt prune
    

    restic -r s3:https://s3.us-west-1.lyvecloud.seagate.com/restic-new-bkt prune  
    
    enter password for repository: 
    
    Repository 99eb2711 opened successfully, password is correct 
    
    Loading indexes… 
    
    Loading all snapshots… 
    
    Finding data that is still in use for 1 snapshots 
    
    [0:00] 100.00 % 1 / 1 snapshots… 
    
    (snip) 
    
    Deleting obsolete index files 
    
    [0:00] 100.00% 3 / 3 files deleted… 
    
    Removing 3 old packs 
    
    [0:00] 100.00% 3 / 3 files deleted…