Getting Started

Connect the power cable

Connect the included power supply in the following order:

1. Connect the power supply to Lyve Drive Shuttle's power input.
2. Connect the power cord to the power supply.
3. Connect the power cord to a live power outlet.

View the E-Ink display

Follow the onscreen instructions to complete the setup.

 When completing the setup, a popup prompts you to set the clock for Lyve Drive Shuttle. To make certain that your device has the correct date, time, and time zone, follow the prompt to the clock setting. You can also set the clock at any time by tapping on the Menu icon () and selecting Settings > Clock.

Lyve Drive Shuttle is ready

After setup is complete, tap an action to get started.

 For advanced network features such as NFS, site configurations, and volume password-protection, tap on the Menu icon () and select Settings > Network.

Initial configuration

Site credentials

In addition to DHCP, you can set up unique network credentials for all your sites. Go to network settings to manage the device’s credentials for quick connections when shuttling between sites. See Network Configuration.

Register Lyve Drive Shuttle

Get the most from Lyve Drive Shuttle with easy access to information and support.

To register your device:

1. On the Home screen, tap the Menu icon ().
2. Tap Support.
3. Tap Register.
4. Tap on the Name field and enter your name.
5. Tap on the Email field and enter your email address.
6. Tap Register.

Power off/on Lyve Drive Shuttle

To power off Lyve Drive Shuttle:

1. On the Home screen, tap the Menu icon ().
2. Tap Shut Down.

Lyve Drive Shuttle does not have a power button. To power on the device, disconnect and reconnect the power cable.