Was this content helpful?
How could we make this article more helpful?
The Seagate NAS Pro 4-Bay and 6-Bay feature an LCD menu on the front of the device. It provides important information when booting or powering off the NAS Pro. You can also check general hardware and operating system settings while the NAS Pro is powered on. Review the table below for further details on the LCD menu.
See System Overview for the locations of the LCD menu and the up/down arrows.
Menu | Sub-menu |
---|---|
Network | See the IP addresses assigned to the NAS Pro. |
Storage | See the percent of storage used: Globally and per volume. |
Alerts | Up to five alerts are listed on the sub-menu. Alerts include: temperature; casing; fan; and disks. |
Temperature | Check the temperatures for the NAS Pro's: hard drives; CPU; and motherboard. |
Fan | Review the fan’s rotational speed. |
Date | Review the date, time, and uptime. Uptime refers to the amount of time that the NAS Pro has been powered on. It is listed as hh:mm. |
Software Information | Check the version of Seagate NAS OS. |
Each menu and sub-menu will remain on the LCD display for 30 seconds. To exit a menu or sub-menu, apply a long push to the NAS Pro’s up or down arrow.