SAVE AS PDF
Lyve Mobile Rackmount Receiver User Manual
Lyve Mobile Rackmount Receiver 

Was this content helpful?

Welcome

Seagate® Lyve  Mobile Rackmount Receiver facilitates quick ingestion of shuttle content directly into a network center.

Box content

  • Lyve Mobile Rackmount Receiver
  • 1.8 m power cord (x4: US, UK, EU, AU/NZ)
  • Rail kit accessory box
  • Front latch kit accessory box
  • Power cord zip tie/lock (x2)
  • Quick Start Guide

Specifications

Dimensions

Side Dimensions (in/mm)
Length 19 in/482.6 mm
Width 4.638 in/117.8 mm
Depth 24.598 in/624.78 mm

Weight

Part Weight (lb/kg)
Mobile Rackmount Receiver 47.52 lb/21.6 kg

Electrical

Power adapter, AC/DC base in:100~240V/9.4A, out:12V/65A

 

Views

Front view

KeyI/ODescription
A Slot A Slot for compatible device.
B Slot B Slot for compatible device.

Back view

KeyI/ODescription
Power switch Turn power on/off. 
1A
1B
Power input - A
Power input - B
Redundant power supply units. Each unit on its own is capable of delivering power to Lyve Mobile Rackmount Receiver and installed devices. See Power Connections.
2A Slot A / Left Data connection for device in slot A. See Data Connections.
3A Slot A / Right Host interface for future expansion. Not available with all models.
4A Ethernet management port - A Ethernet connection for device in slot A. Not to be used for data transfers.
5A CLI management port - A Command-line interface port for device in slot A. For service only. Not to be used for data transfers.
2B Slot B / Left Host interface for future expansion. Not available with all models.
3B Slot B / Right Data connection for device in slot B. See Data Connections.
4B Ethernet management port - B Ethernet connection for device in slot B. Not to be used for data transfers.
5B CLI management port - B Command-line interface port for device in slot B. For service only. Not to be used for data transfers.