The light on your FreeAgent drive flashes to indicate various drive states. The following
information applies to all FreeAgent drives.
|
Drive State |
Light |
|
Off or Hibernate |
Off |
|
Idle |
90% illumination |
|
Active (data transfer) |
Slow flashing between 90% and 20% illumination |
|
Standby (disk not spinning) |
20% illumination |
|
Unmounted or cable removed |
Off |
|
Error |
Fast flashing |
Disabling the activity light:
The LED Control feature allows you to control the lights on your drive. Your drive lights flicker
to indicate drive activity and status.
Note: This feature is only available for FreeAgent drives.
- In the My Drives window, select the drive you want to adjust and click Settings. The Settings window opens.
- Click Adjust LED Control. The Drive Lights window opens.
- To turn the drive lights off, click Turn lights off and click Apply. To turn the drive lights back on, click Display status and activity lights and click Apply.
The drive lights may automatically turn back on in the following situations:
• If power is turned off and back on for the drive
• If the drive is disconnected and reconnected
