PDF로 저장
FireCuda 530R SSD Installation Guide
FireCuda 530R SSD 

이 기사가 도움이 되었습니까?

Introduction

Recommendations

  • Intended for desktop PCs.
  • FireCuda 530R SSD's heatsink is pre-installed and should not be removed as it can damage the SSD.
  • With the heatsink, the product exceeds standard M.2 dimensions. Dimensions of the FireCuda 530R SSD are 80.85mm (L) x 24.22mm (W) x 11.10mm (H). Verify that your system provides enough space for installation.
  • M.2 connectors H3.2 and above are recommended for an SSD with a heatsink.
  • For optimal performance, provide sufficient airflow and cooling.

Before installation

 IMPORTANT Make certain your computer's BIOS is up to date before installing FireCuda 530R SSD. See your computer or motherboard documentation for information on how to access the BIOS.
  • Most motherboards have more than one M.2 slot available for SSD drives. Before installing FireCuda 530R SSD:
    • Determine the appropriate M.2 slot on your motherboard for FireCuda 530R SSD. If another SSD drive is already installed in the slot, you'll need to remove it during the installation.
    • Decide whether you want to install your computer operating system on FireCuda 530R SSD and use it as your primary drive. See your computer or motherboard documentation for details on how to boot from an M.2 SSD.
    • If you need to transfer files from another drive to FireCuda 530R SSD, consider how you will move your data or clone your drive before starting the installation.
    • For optimal performance, it's recommended you use an M.2 PCIe Gen 4x4 slot. Refer to your motherboard user manual.

Precautions

  • Unpack the SSD.
  • Inspect the SSD for any damages.
  • For the safety of your SSD, please take the necessary precautions to avoid electrostatic discharge. Power down and power drain your computer according to the instructions provided in the computer product documentation.
  • Back up the data from the existing storage device.
 CAUTION Electrostatic discharge (ESD) can damage the SSD. Make sure that you install the SSD at an ESD-safe workstation. Ground yourself to protect the device from any static electricity present in your body.

Parts

FireCuda 530R SSD

System Requirements

  • M.2 (M key) slot, PCIe® Gen 4×4 interface (backwards compatible with PCIe G3 interface)
  • Windows® 10 or higher