LCD Menu (4-Bay and 6-Bay)

The Seagate WSS NAS 4-Bay and 6-Bay include an LCD menu. You can check general hardware and operating system settings while the WSS NAS is powered on. Review the table below for further details on the LCD menu.

See System Overview for the locations of the LCD menu and the up/down arrows.

Menu	Sub-menu
Network	See the IP addresses assigned to the WSS NAS.
Storage	See the percent of storage used: globally and per volume.
Alerts	Up to five alerts are listed on the sub-menu. Alerts include: temperature; casing; fan; and storage.
Temperature	Check the temperatures for the WSS NAS's: hard drives; CPU; and motherboard.
Fan	Review the fan’s rotational speed.
Date	Review the date, time and uptime. Uptime refers to the amount of time that the WSS NAS has been powered on.
Software Information	Check the version of the Seagate Monitor tab in the Windows Storage Server 2012 R2 Essentials dashboard.

Access the LCD display menu

Apply a short push on the WSS NAS’s up or down arrow to turn the LCD on.
Apply a long push on the WSS NAS’s up or down arrow to enter the main menu.
Push the WSS NAS’s up or down arrow to search the menu selections. Each screen reveals two selections.
Use the WSS NAS’s up or down arrow to highlight your selection. A horizontal arrow points to the selection.
Apply a long push on the WSS NAS’s up or down arrow to enter the sub-menu for that selection.
If applicable, push the WSS NAS’s up or down arrow to search through the sub-menu selections.

Each menu and sub-menu remains on the LCD display for 30 seconds. To exit a sub-menu, apply a long push to the WSS NAS’s up or down arrow.

Click here to access an up-to-date online versionof this document. You will also find the most recent content as well as expandable illustrations, easier navigation, and search capability.